 |
products are distributed by MARYLAND METRICS
- offering a 20% discount from the list price
|
Click here to see the Bondhus price list in PDF format.
Click the binocular icon
to search for a part number on the price list.
WEB CUSTOMER DISCOUNT - The 'Discounted Price each' column shows your 20% off pricing.
We break packaging. Further volume discounts may be available - please inquire
How to specify the part number on the order form: R030-(+ Part No.) example: R030-0150
Use Our Secure Order Form:
It
can be used for credit/purchasing card, open account, or C.O.D.
orders, RFQ's,
or other secure correspondence.
Return to the Bondhus Master Page Index
Date: January 4, 1999
MAXIM TECHNOLOGIES, INC.
662 Cromwell Avenue
St. Paul, Minnesota 55114
Project: Salt Spray Testing
Client Purchase Order Number: Verbal
Prepared By: Scott W. Britzius Project Engineer/Experimental
Mechanics Mechanical Engineering Department
Reviewed By: Richard S. Alberg Manager Mechanical Engineering
Department
Phone: (651) 659-7307
"An Affirmative Action, Equal Opportunity Employer"
The test results contained in this report pertain only to the
samples submitted for testing and not necessarily to all similar products.
Comparison Performance Torque Testing
INTRODUCTION:
This report presents the results of comparison Salt Spray performance tests conducted on
5/16" hex wrenches
produced by three manufacturers. The testing was requested on
January 4, 1999 by Mr Mike Blackston of
the Bondhus Corporation.
The scope of work was limited to purchasing the
hex wrenches directly from an industrial distributor, conducting the
salt fog exposure testing and providing a report of the results.
Testing was completed on February 4, 1999.
SUMMARY OF RESULTS:
SAMPLE IDENTIFICATION:
Two (2) wrenches each were
purchased from MSC Industrial Supply Co. under Maxim Technologies
purchase order number 51345 on 1-14-99 and shipped to our facility
by UPS.
Bondhus – 5/16" Hex Wrench, 1-1/2 x 6" with ball end.
Eklind Tool – 5/16" Hex Wrench, 1-1/2 x 6" with ball end.
Allen – 5/16" Hex Wrench, 1-1/2 x 6" with ball end.
TEST METHODS:
The test was conducted in accordance with
ASTM:B117-94. The samples were tested as received with no cleaning
prior to exposure. The wrenches were supported at a angle of 15°
from vertical for 20 hours under the following conditions:
| Test Media: |
5% Salt solution |
| Cabinet Temperature: |
95° F |
| Fog Collection (ml/hr): |
1.2 to 1.3 |
| Specific Gravity: |
1.037 |
| pH Range: |
7.0 |
| Humidifier Temperature: |
110° F |
| Tower Pressure: |
12 psig |
INSTRUMENTATION:
Salt Spray Chamber #2, MTI# MM 190-007, calibration
traceable to the NIST on 6-4-98 due 6-4-99.
REMARKS:
The wrenches will be retained for thirty days than discarded.
|
|
|
|
Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday
8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142
& E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
Please note that all Trademarks and Tradenames are the
property of their respective owners.
copyright 2005, 2006 maryland metrics/bondhus corp -- all rights reserved -- ver bb10l nnnnn.htm
