KANA Products are available from MARYLAND METRICS


We provide a variety of gears according to different materials, heat treaments, precisions and sizes, and also offer gears that allow secondary operations to be performed on the boring, keyway and set-screws.
We offer a variety of designed and models of gears in industry, including spur, miter, rack, bevel and other gears. Both 14-1/2 and 20 pressure angle, involute, full depth system gears. While 20 PA gears are generally recognized as higher load carrying capacity, 14-1/2 PA gears have extensive use.

Spur gears are available in 14-1/2 pressure angle from 48 to 3 dp and 20 pressure angle from 20 to 4dp. They are avialble in both unhardened-type and hardened type for longer life.

Miter gears will provide smooth, quite operation if properly mounted and lubricated. They must be mounted at 90 angle and at right mounting distance from the end of the hub of one gear to the center line of matching gear.

Rack is made from carbon steel. it is available in 14-1/2 and 20 pressure angle in 2, 4 and 6 ft. lengths. Special rack can be supplied in other material, sizes and pitches.

Note: KANA products are not stocked in the USA. Please allow for delivery time from Japan.

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 2005 maryland metrics/kana-chain -- all rights reserved -- ver a18iCD kana.htm