KANA Products are available from MARYLAND METRICS

	With wide variations respond to users need promptly! Standard Sprockets
KANA Sprockets make full performance of the characteristic of Sprockets, roller chains and accomplished high transmission efficiency.

Finished Bore Sprocket
	KANA Finished Bore Sprockets are ready for immediate installation. These are completely finished to the bore to size of the shaft dia., keyway and set screw. Because these sprockets are manufactured in quantity, it is economical to price lower than the re-machining of stock-bore sprocket, with re-boring, keyway and setscrews. Finished Bore series: Bored to size with standard keyway and set-screws. Finished Bore series are available for Standard "B" Type, Stainless "B" Type, Double Pitch "B" Type and Single Double sprockets. Keyway is on center line of tooth. Metric bore size are also available from stock.
Stock Bore Type "A" Sprocket
	Type "A" steel sprockets are usually fitted over hubs or bolted to flanges. The bolt holes can be located to meet any requirement. Hardened teeth Type HG-A sprockets are also in stock.
Stock Bore Type "B" Sprocket
	Type "B" Steel Sprockets are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements. Stock bore pinion sprockets with hardened teeth and large teeth sprockets with no hardened in stock. HG-B Type the large teeth sprocket with hardened teeth are also in stock.
Stock Bore Type "C" Sprocket
	Many applications require a sprocket with a hub on both sides, especially in the larger diameters and pitches. Ample hubs are used for the large bores generally required, and for heavy industrial uses this style is the answer.
Double Strand Type "B" & "C" Sprocket
	Type "B" & "C" Steel Sprockets for multiple strands are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements. Stock bore pinion sprockets with hardened teeth and large teeth, sprockets with no hardened in stock. HG-2B Type the large tooth Stock Bore sprockets with hardened teeth are also in stock.
Single-Double Sprocket
	Single-Double sprockets are ready for immediate delivery from stock. They are used for drive sprocket of roller conveyer system, ANSI 40,50,60,80 series Stock Bore and Finished Bore are available.
Stainless Type "B" Sprocket
	Type "B" Stainless Steel Sprockets are ready for immediate delivery from stock. They are precision made, accurately machined and finished, ready off-the-shelf, to be bored to requirements. Finished Bore and Stock Bore sprockets are available.
Double Pitch Type "B" Sprocket
	Finished Bore and Stock Bore sprockets are available for Double pitch roller chain 1",1-1/4",1-1/2",2" and 2-1/2" with standard rolers and carrier rollers.
Weld-Finish Sprockets & Hubs
	KANA offers the most complete line of WELD-FINISH SPROCKETS and HUBS for insertion and welding to products "B" type sprockets quickly. It is economical and save you time. A variety of WELD-FINISH SPROCKET sizes for #35, 41, 40, 50, 60, 80 & 100, Black oxide finish. Are available for V, W, X, XX & Y-series of hub. Black oxide finish.
Taper-Lock Sprockets
	Off-the-shelf service complete with bushing for the desired shaft size can be provided with large range of Taper-Lock Sprockets. They are easily installed, removed and grip firmly, even on worn or under-sized shafts.

Note: KANA products are not stocked in the USA. Please allow for delivery time from Japan.