logo

Maryland Metrics: Fluro Angle-Joints

Angle Joints
Angle Joints to DIN 71802
consisting of ball stud to DIN 71803 and ball journal to DIN 71805

 

 

Form C with threaded stud and hexagon nut.
Form CS with threaded stud, hexagon nut and external clip

Size
(D1)
a
+ 0,3
d2 d3
+ 0,5
d4
+ 0,5
e
min
I2
+ 0,3
I3
+ 0,3
SW
h14
a1 = a2 = Weight g
08 22 M 5 8 12,8 10,2 10,2 9 7 18 10 15,2
10 25 M 6 10 14,8 11,5 12,5 11 8 18 15 25,2
13 30 M 8 13 19,3 14,0 16,5 13 11 18 15 53,1
16 35 M 10 16 24,0 15,5 20,0 16 13 18 15 104,0
16 35 M 12 16 24,0 15,5 20,0 16 13 18 15 104,0
19 45 M 14x1,5 22 30,0 21,5 28,0 20 16 18 15 221,0
19 45 M 14x2 22 30,0 21,5 28,0 20 16 18 15 221,0

Materials:

Ball Journal: Steel, minimum strength Rm= 500N/mm2
Ball Stud: Steel, minimum strength Rm= 600N/mm2
Surface: blank, zinc plated clear, on request: yellow or black chromated
Alternative: Stainless steel to 1.4305, Aisi 303
Ordering Details:
e.g. Angle Joint with external clip, Form CS with ball diameter D1=10mm:
Angle Joint DIN 71802 - CS 10
Left Hand Thread: Left hand thread only at the ball journal available:
Angle Joint DIN 71802 - CS 10 LH
Loose Fit: increased internal clearance available:
Angle Joint DIN 71802 - CSL 10 

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 2007 Maryland Metrics/FLURO-Gelenklager GmbH. -- All rights reserved. -- ver cc27a nnnnn.htm