Maryland Metrics: Fluro LockingNuts
| Locking Nuts to DIN 934/439 |
| Normal
Form
DIN 934 / ISO 4032
Narrow Form
|
 |
| Nominal Size | Standard Thread Pitch | SW | Thread Pitch M... | ISO 4032/DIN 934 | ISO 4036/DIN 439 | |||||||||||||
| x0,4 | x0,5 | x0,7 | x0,8 | x1,0 | x1,25 | x1,5 | x1,75 | x2,0 | x2,5 | x3,0 | x4,0 | m1 | Weight g |
m2 | Weight g |
|||
| M 2 | (M 2x0,4) | 4,0 | X | 1,6 | 0,2 | 1,2 | 0,1 | |||||||||||
| M 3 | (M 3x0,5) | 5,5 | X | 2,4 | 0,4 | 1,8 | 0,3 | |||||||||||
| M 4 | (M 4x0,7) | 7,0 | X | 3,2 | 0,8 | 2,2 | 0,6 | |||||||||||
| M 5 | (M 5x0,8) | 8,0 | X | 4,0 | 1,2 | 2,7 | 0,8 | |||||||||||
| M 6 | (M 6x1) | 10,0 | X | 5,0 | 2,4 | 3,2 | 1,5 | |||||||||||
| M 8 | (M 8x1,25) | 13,0 | X | X | 6,5 | 5,1 | 4,0 | 3,1 | ||||||||||
| M 10 | (M 10x1,5) | 17,0 | X | X | X | 8,0 | 11,1 | 5,0 | 6,9 | |||||||||
| M 12 | (M 12x1,75) | 19,0 | X | X | X | 10,0 | 16,3 | 6,0 | 9,8 | |||||||||
| M 14 | (M 14x2) | 22,0 | X | 11,0 | 24,0 | 7,0 | 15,0 | |||||||||||
| M 16 | (M 16x2) | 24,0 | X | X | 13,0 | 32,0 | 8,0 | 19,5 | ||||||||||
| M 18 | (M 18x2,5) | 27,0 | 0 | 0 | 0 | 0 | 00 | 0 | X | 0 | 0 | 0 | 0 | 0 | 15,0 | 47,0 | 9,0 | 28,0 |
| M 20 | (M 20x2,5) | 30,0 | 00 | 000 | 000 | 000 | 000 | 00 | X | 0 | 0 | X | 0 | 0 | 16,0 | 61,0 | 10,0 | 38,0 |
| M 22 | (M 22x2,5) | 32,0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | 0 | 0 | 0 | 0 | 18,0 | 75,0 | 11,0 | 46,0 |
| M 24 | (M 24x3) | 36,0 | 0 | X | 19,0 | 104,0 | 12,0 | 66,0 | ||||||||||
| M 27 | (M 27x3) | 41,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | 0 | 0 | 22,0 | 158,0 | 13,5 | 96,0 |
| M 30 | (M 30x3,5) | 46,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 000 | X | 0 | 0 | 0 | 24,0 | 219,0 | 15,0 | 137,0 |
| M 36 | (M 36x4) | 55,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | X | 0 | 29,0 | 370,0 | 18,0 | 230,0 |
| M 39 | (M 39x4) | 60,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | 31,0 | 470,0 | 19,5 | 300,0 |
| M 42 | (M 42x4,5) | 65,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | X | 0 | 34,0 | 610,0 | 21,0 | 380,0 |
| M 45 | (M 45x4,5) | 70,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | 36,0 | 750,0 | 22,5 | 470,0 |
| M 48 | (M 48X5) | 75,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 0 | 0 | 0 | 38,0 | 910,0 | 24,0 | 580,0 |
| M 52 | (M 52x5) | 80,0 | 0 | 0 | 0 | 0 | 0 | 0 | 00 | 0 | 0 | 0 | X | 0 | 42,0 | 1130,0 | 26,0 | 700,0 |
| M 56 | (M 56x5,5) | 85,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | 45,0 | 1350,0 | 28,0 | 840,0 |
| M 64 | (M 64x6) | 95,0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 00 | 0 | 0 | 0 | X | 51,0 | 1850,0 | 32,0 | 1160,0 |
X) available ex stock, Standard Form only
with standard thread in stock
| Materials: | Steel zinc plated,
strength grade: 04 or better A2 is equivalent to stainless steel 1.4301, Aisi 304 and 1.4303, Aisi 305 or alternative material |
| Thread: | Right hand or left hand threads |
| Remarks: | Across-flats dimension SW,
Weight, Width m1/m2 and Chamfer can differ from the table above and the
DIN, because of different manufacturings methods. Locking Nuts DIN 439 according to ISO 4036 (without chamfer) or ISO 4035 (with chamfer). Locking Nuts DIN 439 fine thread according to ISO 8675 (with chamfer). |
| Ordering Details: | e.g.
Locking Nut M 10 Left Hand (Normal Form with standard thread) in
stainless steel A2: Locking Nut DIN 934-M10-A2-Left Hand e.g. Locking Nut M 39x3 Right Hand (Narrow Form) in Steel, zinc plated: Locking Nut DIN 439-M39x3-04 |