| Rod Ends Series K - standard |
| Series
GA Rod Ends with male thread made from free-cutting or heat-treated steel, zinc plated with lubrication fittings. Especially suited for axial loads. |
 |
| Size (D) |
B | M | A | F | L | O | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Weight gram |
Weight lb. |
| 5 | 8 | 6,00 | 18 | 33 | 42 | 7,7 | M 5 | 20 | 4,3 | 2,5 | 900 | 13 | 0,028665 |
| 6 | 9 | 6,75 | 20 | 36 | 46 | 8,9 | M 6 | 22 | 6,0 | 3,2 | 760 | 20 | 0,0441 |
| 8 | 12 | 9,00 | 24 | 42 | 54 | 10,4 | M 8 | 25 | 11,0 | 5,4 | 620 | 33 | 0,072765 |
| 10 | 14 | 10,50 | 28 | 48 | 62 | 12,9 | M 10 | 29 | 17,4 | 7,5 | 500 | 56 | 0,12348 |
| 12 | 16 | 12,00 | 32 | 57 | 70 | 15,4 | M 12 | 33 | 25,3 | 10,0 | 450 | 87 | 0,191835 |
| 14 | 19 | 13,50 | 36 | 60 | 78 | 16,8 | M 14 | 36 | 24,5 | 12,9 | 360 | 129 | 0,284445 |
| 16 | 21 | 15,00 | 42 | 66 | 87 | 19,3 | M 16 | 40 | 36,4 | 16,1 | 350 | 189 | 0,416745 |
| 18 | 23 | 16,50 | 46 | 72 | 95 | 21,8 | M 18x1,5 | 44 | 43,1 | 19,6 | 320 | 267 | 0,588735 |
| 20 | 25 | 18,00 | 50 | 78 | 103 | 24,3 | M 20x1,5 | 47 | 49,5 | 23,6 | 280 | 348 | 0,76734 |
| 22 | 28 | 20,00 | 54 | 84 | 111 | 25,8 | M 22x1,5 | 51 | 57,3 | 28,6 | 250 | 443 | 0,976815 |
| 25 | 31 | 22,00 | 60 | 94 | 124 | 29,6 | M 24x2 | 57 | 67,8 | 35,4 | 230 | 600 | 1,323 |
Materials:
| Housing: | up to size 12 turned from free-cutting steel to 9SMnPb28K, |
| from size 14 forged from heat-treated steel to C22 | |
| Insert: | special brass to CuZn40Al1 |
| Ball: | bearing steel to 100Cr6, hardened, ground, polished |