| Rod Ends series K - heavy duty |
| Series
GAS Rod Ends with male thread made from free-cutting or heat-treated steel, zinc plated and fitted with a lubrication fitting. Especially suited for high speed applications. |
 |
| Size (D) |
B | M | A | F | L | O | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Weight gram |
Weight lb. |
| 2 | 4,8 | 3,60 | 9 | 20 | 24,5 | 3,6 | M 2 | 12 | 0,6 | 1,1 | 1400 | 3 | 0,006615 |
| 3 | 6,0 | 4,50 | 14 | 26 | 33,0 | 5,1 | M 3 | 15 | 1,5 | 1,8 | 1300 | 6 | 0,01323 |
| 5 | 8,0 | 6,00 | 18 | 33 | 42,0 | 7,7 | M 5 | 20 | 4,3 | 3,3 | 1200 | 13 | 0,028665 |
| 6 | 9,0 | 6,75 | 20 | 36 | 46,0 | 8,9 | M 6 | 22 | 6,0 | 4,3 | 1500 | 20 | 0,0441 |
| 8 | 12,0 | 9,00 | 24 | 42 | 54,0 | 10,4 | M 8 | 25 | 11,0 | 7,1 | 1200 | 33 | 0,072765 |
| 10 | 14,0 | 10,50 | 28 | 48 | 62,0 | 12,9 | M 10 | 29 | 17,4 | 10,0 | 1000 | 56 | 0,12348 |
| 12 | 16,0 | 12,00 | 32 | 54 | 70,0 | 15,4 | M 12 | 33 | 23,5 | 13,3 | 860 | 87 | 0,191835 |
| 14 | 19,0 | 13,50 | 36 | 60 | 78,0 | 16,8 | M 14 | 38 | 20,8 | 17,1 | 750 | 129 | 0,284445 |
| 16 | 21,0 | 15,00 | 42 | 66 | 87,0 | 19,3 | M 16 | 40 | 32,0 | 21,4 | 660 | 189 | 0,416745 |
| 18 | 23,0 | 16,50 | 46 | 72 | 95,0 | 21,8 | M 18x1,5 | 44 | 38,6 | 26,2 | 600 | 267 | 0,588735 |
| 20 | 25,0 | 18,00 | 50 | 78 | 103,0 | 24,3 | M 20x1,5 | 47 | 43,8 | 31,4 | 540 | 348 | 0,76734 |
| 22 | 28,0 | 20,00 | 54 | 84 | 111,0 | 25,8 | M 22x1,5 | 51 | 52,6 | 38,1 | 500 | 443 | 0,976815 |
| 25 | 31,0 | 22,00 | 60 | 94 | 124,0 | 29,6 | M 24x2 | 58 | 62,4 | 47,1 | 440 | 600 | 1,323 |
| 30 | 37,0 | 25,00 | 70 | 110 | 145,0 | 34,8 | M 30x2 | 71 | 81,6 | 63,5 | 370 | 1030 | 2,27115 |
| 35 | 43,0 | 28,00 | 80 | 125 | 165,0 | 37,7 | M 36x2 | 77 | 100,8 | 80,0 | 330 | 1600 | 3,528 |
| 40 | 49,0 | 35,00 | 90 | 142 | 187,0 | 44,2 | M 42x2 | 78 | 124,0 | 115,5 | 290 | 2550 | 5,62275 |
Materials:
| Housing: | up to size 12 turned from free-cutting steel to 9SMnPb28K, |
| from size 14 forged from heat-treated steel to C22 | |
| Insert: | special high strength bronze to CuSn8 |
| Ball: | bearing steel to 100Cr6, hardened, ground, polished |
| This series is also available sealed (-2RS) or with threaded bolt (-BO). |