| Rod Ends Series K - standard |
| Series
GI Rod Ends with female thread made from free-cutting or heat-treated steel, zinc plated and with lubrication fittings. Especially suited for axial loads. |
 |
| Size (D) |
B | M | A | F | L | K | J | O | SW | G | GL | Static load Co kN |
Dynamic load C kN |
Limiting speed rev/min |
Weight gram |
Weight lb. |
| 5 | 8 | 6,00 | 18 | 27 | 36 | 11 | 9,0 | 7,7 | 9 | M 5 | 10 | 9,9 | 2,5 | 900 | 18 | 0,03969 |
| 6 | 9 | 6,75 | 20 | 30 | 40 | 13 | 10,0 | 8,9 | 11 | M 6 | 12 | 11,9 | 3,2 | 760 | 27 | 0,059535 |
| 8 | 12 | 9,00 | 24 | 36 | 48 | 16 | 12,5 | 10,4 | 13 | M 8 | 16 | 17,1 | 5,4 | 620 | 46 | 0,10143 |
| 10 | 14 | 10,50 | 28 | 43 | 57 | 19 | 15,0 | 12,9 | 17 | M 10 | 20 | 21,4 | 7,5 | 500 | 76 | 0,16758 |
| 12 | 16 | 12,00 | 32 | 50 | 66 | 22 | 17,5 | 15,4 | 19 | M 12 | 22 | 27,1 | 10,0 | 450 | 115 | 0,253575 |
| 14 | 19 | 13,50 | 36 | 57 | 75 | 25 | 20,0 | 16,8 | 22 | M 14 | 25 | 24,5 | 12,9 | 360 | 170 | 0,37485 |
| 16 | 21 | 15,00 | 42 | 64 | 85 | 27 | 22,0 | 19,3 | 22 | M 16 | 28 | 37,1 | 16,1 | 350 | 230 | 0,50715 |
| 18 | 23 | 16,50 | 46 | 71 | 94 | 31 | 25,0 | 21,8 | 27 | M 18x1,5 | 32 | 43,1 | 19,6 | 320 | 320 | 0,7056 |
| 20 | 25 | 18,00 | 50 | 77 | 102 | 34 | 27,5 | 24,3 | 32 | M 20x1,5 | 33 | 49,5 | 23,6 | 280 | 415 | 0,915075 |
| 22 | 28 | 20,00 | 54 | 84 | 111 | 37 | 30,0 | 25,8 | 32 | M 22x1,5 | 37 | 57,3 | 28,6 | 250 | 540 | 1,1907 |
| 25 | 31 | 22,00 | 60 | 94 | 124 | 42 | 33,5 | 29,6 | 36 | M 24x2 | 42 | 67,8 | 35,4 | 230 | 750 | 1,65375 |
Materials:
| Housing: | up to size 12 turned from free-cutting steel to 9SMnPb28K, |
| from size 14 forged from heat-treated steel to C22 | |
| Insert: | special brass to CuZn40Al1 |
| Ball: | bearing steel to 100Cr6, hardened, ground, polished |