Maryland Metrics DURBAL PM SERIES ROD ENDS

PM SERIES ROD ENDS BY DURBAL©

The PM series are Heavy-duty rod ends with integral self-aligning ball bearings. This design is especially suitable for high speeds, large swivelling angles or rotating movements with relatively low or medium loads. Prominent technical features are the low bearing friction, extended times for re-grease maintenance, as well as the sealing against rough dirt penetration by means of shields on both sides. A special heat treatment procedure confers the rod end housing a raceway hardness adapted to the anti friction bearing, ensuring at the some time high stability with changing loads.

METRIC

Left hand part numbers are identified by ending the P/N with -502
To convert Newtons to pounds, multiply by 0.2248

PART #

D1

D3

D6

B1

H1

H2

L1

L2

Dynamic load in newtons

Static load in newtons

PM 05-00-501

5

M8 X 1.0

19

12

-

57

-

39.5

1610

480

PM SO 05-01-501

5

M8 X 1.0

19

12

33.5

-

16

-

1610

480

PM 06-00-501

6

M10 X 1.0

24

14

-

64

-

42.5

2445

765

PM SO 06-02-501

6

M10 X 1.0

24

14

40.5

-

19

-

2445

765

PM 08-00-501

8

M12 X 1.5

30

15

-

72

-

46.5

2605

985

PM SO 08-02-501

8

M12 X 1.5

30

15

48.5

-

23

-

2605

985

PM 10-00-501

10

M14 X 1.5

36

20

-

82

-

49.5

5120

1905

PM SO 10-03-501

10

M14 X 1.5

36

20

58.5

-

26

-

5120

1905

PM 12-00-501

12

M16 X 1.5

40

20

-

90

-

53.5

5345

2065

PM SO 12-02-501

12

M16 X 1.5

40

20

65.5

-

29

-

5345

2065

PM 15-00-501

15

M20 X 1.5

42

20

-

100

-

62.5

5485

3270

PM SO 15-02-501

15

M20 X 1.5

42

20

73.5

-

36

-

5485

3270

PM 17-00-501

17

M20 X 1.5

48

22

-

105

-

62.5

5575

2680

PM SO 17-01-501

17

M20 X 1.5

48

22

78.5

-

36

-

5575

2680

PM 20-00-501

20

M24 X 1.5

56

24

-

117

-

68.5

6165

3140

PM SO 20-02-501

20

M24 X 1.5

56

24

89.5

-

41

-

6165

3140

Durbal page index ... Top of page

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 1999, 2000 maryland metrics/schlegel durbal -- all rights reserved -- ver [an error occurred while processing this directive]v24d pm1.htm [Enhanced for Netscape/IE]

PART #	D1	D3	D6	B1	H1	H2	L1	L2	Dynamic load in newtons	Static load in newtons
PM 05-00-501	5	M8 X 1.0	19	12	-	57	-	39.5	1610	480
PM SO 05-01-501	5	M8 X 1.0	19	12	33.5	-	16	-	1610	480
PM 06-00-501	6	M10 X 1.0	24	14	-	64	-	42.5	2445	765
PM SO 06-02-501	6	M10 X 1.0	24	14	40.5	-	19	-	2445	765
PM 08-00-501	8	M12 X 1.5	30	15	-	72	-	46.5	2605	985
PM SO 08-02-501	8	M12 X 1.5	30	15	48.5	-	23	-	2605	985
PM 10-00-501	10	M14 X 1.5	36	20	-	82	-	49.5	5120	1905
PM SO 10-03-501	10	M14 X 1.5	36	20	58.5	-	26	-	5120	1905
PM 12-00-501	12	M16 X 1.5	40	20	-	90	-	53.5	5345	2065
PM SO 12-02-501	12	M16 X 1.5	40	20	65.5	-	29	-	5345	2065
PM 15-00-501	15	M20 X 1.5	42	20	-	100	-	62.5	5485	3270
PM SO 15-02-501	15	M20 X 1.5	42	20	73.5	-	36	-	5485	3270
PM 17-00-501	17	M20 X 1.5	48	22	-	105	-	62.5	5575	2680
PM SO 17-01-501	17	M20 X 1.5	48	22	78.5	-	36	-	5575	2680
PM 20-00-501	20	M24 X 1.5	56	24	-	117	-	68.5	6165	3140
PM SO 20-02-501	20	M24 X 1.5	56	24	89.5	-	41	-	6165	3140