[ Home ] [ Knobs Only ] [ Thumb Screws ] [ Key Drive ] [ Kits ] [ FAQ ] [ What's New/ Etc. ]

Dual Adjusting Type
Click on the desired thread pitch to go to that part of the page.
Or scroll down to see the whole page.

10-24         10-32
UNC-3A                                      UNF-3A

10-24 SERIES

(All of the screws in the tables below have 3A threads and are fully threaded except part numbers marked with a " * " at the end)
(Screws longer than listed are available but are normally not  fully threaded.)

When using the hex socket to install this thumbscrew, caution should be taken not to over tighten the plastic knob if it comes in contact with a surface, as knob damage or breakage can occur.

The plastic knob portion of the thumbscrew is currently offered in black and will soon be available in red, gray and yellow. As with the entire line, Shear-Loc will furnish free samples for testing needs.

Knurled Style Key Drive Thumbscrew

Keys Available at Competitive Prices

We also offer many other standard & semi standard screw lengths fully and not fully threaded.
  Please call for more information

Phones: (410)358-3130 (800)638-1830     Faxes: (410)358-3142 (800)872-9329

Screw/L Dim.	A Dim./Style	Part Number	B	R	G	Y	A	S	Z
10-32x3/8"	5/8 Knurled	K02-1032-0.37	x	o	o	o	x	x	o
10-32x1/2	5/8 Knurled	K02-1032-0.50	x	o	o	o	x	x	o
10-32x5/8	5/8 Knurled	K02-1032-0.62	x	o	o	o	x	x	o
10-32x3/4	5/8 Knurled	K02-1032-0.75	x	o	o	o	x	x	o
10-32x7/8	5/8 Knurled	K02-1032-0.87	x	o	o	o	x	x	o
10-32x1 1/8	5/8 Knurled	K02-1032-1.12 *	x	o	o	o	x	x	o