Maryland Metrics Technical Data Chart:
T-Slots to DIN 650
|
* Tolerance H8 for tenon and clamping slots, H12 for clamping slots
** p.d. = permissible deviation |
| A* |
B |
B p.d.** |
C |
C p.d.** |
H max. |
H min. |
N max. |
R1 max. |
R2 max. |
T |
| 6 | 11 | +1.5 | 5 | +1 | 13 | 11 | 1 | 0.6 | 1 | 0.5 |
| 8 | 14.5 | +1.5 | 7 | +1 | 18 | 15 | 1 | 0.6 | 1 | 0.5 |
| 10 | 16 | +2 | 7 | +1 | 21 | 17 | 1 | 0.6 | 1 | 0.5 |
| 12 | 19 | +2 | 8 | +1 | 25 | 20 | 1 | 0.6 | 1 | 0.5 |
| 14 | 23 | +2 | 9 | +2 | 28 | 23 | 1.6 | 0.6 | 1.6 | 0.5 |
| 18 | 30 | +2 | 12 | +2 | 36 | 30 | 1.6 | 1 | 1.6 | 0.5 |
| 22 | 37 | +3 | 16 | +2 | 45 | 38 | 1.6 | 1 | 2.5 | 0.5 |
| 28 | 46 | +4 | 20 | +2 | 56 | 48 | 1.6 | 1 | 2.5 | 0.5 |
| 36 | 56 | +4 | 25 | +3 | 71 | 61 | 2.5 | 1 | 2.5 | 1 |
| 42 | 68 | +4 | 32 | +3 | 85 | 74 | 2.5 | 1.6 | 4 | 1 |
all dimensions in mm