logo

THINK!- MARYLAND METRICS - The One-Stop Source For Metric And British Sized Fasteners, Wrenches, Cutting, & Measuring Tools, Metal Shapes, Oil Seals, O-Rings, Mechanical Power Transmission Equipment, Bearings, Hydraulic And Pneumatic Fittings & Tubing, Workholding Components, Plumbing Fittings, & Some Electrical & Electronic Components. Click to go to Maryland Metrics home page

A short list of material (worknorme/werkstoff) numbers according to the German Standards (DIN)
along with the chemical composition and the most closely corresponding numbers of
American (ASTM/AISI), British (BS), and Russian (GOST) Standards
worknorme/
werkstoff
c Si Mn P S Cr Mo Ni Nb  Ti    worknorme/
werkstoff
DIN BS* ASTM / AISI * GOST *
Germany % % % % % % % % % % Germany Germany Great Britain USA Russia
0.6020 3.20-3.40 1.60-1.80 0.60-0.80 0.4 0.12           0.6020 GG-20 Grade 220 A48-30B Sc20
0.6025 3.00-3.50 1.60-2.00 0.30-0.50 0.3 0.12           0.6025 GG-25 Grade 260 A48-40B Sc25
0.6030 2.60-3.00 1.20-1.80 0.80-1.20 0.2 0.12           0.6030 GG-30 Grade 300 A48-45B Sc30
0.7040                     0.7040 GGG-40 Grade 420/12 A536 Gr. 60-40-18 Vc42-12
0.7043                     0.7043 GGG-40.3 Grade 370/17   Vc42-12
1.0037 =0.17   =1.40 0.045 0.045           1.0037 St.37-2 Fe 360 B    
1.0065 =0.20 traces 0.20-0.50 0.07 0.05           1.0065 St.37-1 A40 A 20 A675 Grade 60  
1.0305 =0.17 0.10-0.35 0.40-0.80 0.04 0.04           1.0305 St.35.8   A106 (A)  
1.0308 =0.17 =0.35 =0.40 0.05 0.05           1.0308 St.35      
1.0402 0.17-0.24 =0.40 0.40-0.70 0.045 0.045 =0.40         1.0402 C22 070 M 20 A576 Grade 1020 20
1.0425 =0.20 =0.40 0.50-1.40 0.03 0.025 =0.30         1.0425 HII 1501 Gr.161-400   16K, 20K
1.0460 0.18-0.23 =0.40 0.40-0.90 0.035 0.03 =0.30         1.0460 C 22.8   A 105  
1.0501 0.32-0.39 =0.40 0.50-0.80 0.045 0.045 =0.40         1.0501 C35 060 A 35 A576-1035 35
1.0503 0.42-0.50 =0.40 0.50-0.80 0.045 0.045 =0.40         1.0503 C 45 080 M 46 A576-1045 45
1.0570 =0.20 =0.55 =1.60 0.035 0.035           1.0570 St.52.3 Fe 510 D1 FF   17GS, 17G1S
1.0619 0.18-0.23 =0.60 0.50-1.20 0.03 0.02           1.0619 GS-C 25 1504-161 Gr. B A216 Grade WCC  
1.0619.01 0.18-0.23 =0.60 0.50-1.20 0.03 0.02           1.0619.01 GS-C 25N 1504-161 Gr. B A216 Grade WCC  
1.0711 =0.13 =0.05 0.60-1.20 0.1 0.18-0.25           1.0711 9S20   AISI 1212  
1.0718 =0.14 =0.05 0.90-1.30 0.1 0.27-0.33           1.0718 9SMnPb 28K   12L 13  
1.1151 0.17-0.24 =0.40 0.30-0.70 0.035 0.035 =0.40         1.1151 Ck 22 055 M 15 1020; 1023 20
1.1156 0.20-0.28 0.30-0.50 0.50-0.80 0.03 0.03 =0.30         1.1156 GS-Ck24   A352 Grade LCB  
1.1181 0.32-0.39 =0.40 0.50-0.80 0.035 0.035 =0.40         1.1181 Ck 35 080 A 35 1035, 1038 35
1.1203 0.52-0.60 =0.40 0.60-0.90 0.035 0.035 =0.40         1.1203 Ck 55 2 C 55/XC 55 H 1 1055 55
1.3964 =0.03 =1.00 4.00-6.00 0.025 0.01 20.0-21.5 3.00-3.50 15.0-17.0     1.3964 X4CrNiMnMoN19 16 5      
1.4000 =0.08 =1.00 =1.00 0.045 0.03 12.0-14.0         1.4000 X6Cr13 403 S 17 AISI 403, 410S, 42 O8Ch13
1.4001 =0.08 =1.00 =1.00 0.045 0.03 13.0-15.0         1.4001 X7Cr14 403 S 17 AISI 403, 410S, 42 O8Ch13
1.4006 0.08-0.12 =1.00 =1.00 0.04 0.03 12.0-14.0   =1.00     1.4006 X10Cr13 410 S 21 AISI 410 12Ch13
1.4016 =0.10 =1.00 =1.00 0.04 0.03 16.0-18.0   =0.50     1.4016 X6Cr17 430 S 15 AISI 430 12Ch17
1.4021 0.17-0.25 =1.00 =1.00 0.045 0.03 12.0-14.0         1.4021 X20Cr13 420 S 37 AISI 420 20Ch13
1.4024 0.12-0.17 =1.00 =1.00 0.045 0.03 12.0-14.0         1.4024 X15Cr13 420 S 29    
1.4034 0.42-0.50 =1.00 =1.00 0.045 0.03 12.5-14.5         1.4034 X46Cr13 420 S 45   40Ch13
1.4057 0.14-0.23 =1.00 =1.00 0.045 0.03 15.5-17.5   1.50-2.50     1.4057 X20CrNi17 2 431 S 29 AISI 431 20Ch17N2
1.4104 0.10-0.17 =1.00 =1.50 0.06 0.15-0.35 15.5-17.5 0.20-0.60       1.4104 X12CrMoS17   AISI 430F  
1.4110 0.48-0.60 =1.00 =1.00 0.04 0.015 13.0-15.0 050-0.80       1.4110 X55CrMo14      
1.4119 0.12-0.17 =1.00 =1.00 0.03 0.03 12.0-14.0 1.00-1.30       1.4119 X15CrMo13      
1.4122 0.33-0.45 =1.00 =1.00 0.04 0.015 15.5-17.5 0.80-1.30 =1.00     1.4122 X35CrMo17
X39CrMo17-1
     
1.4136 0.50-0.90 =2.00 =1.00 0.045 0.03 27.0-30.0 2.00-2.50       1.4136 G-X70CrMo29 2      
1.4300 =0.12 =1.00 =2.00 0.045 0.03 17.0-19.0   8.00-10.0     1.4300 X12CrNi18 8 302 S 25 AISI 302 12Ch18N9
1.4301 =0.07 =1.00 =2.00 0.045 0.03 17.0-19.0   8.50-10.5     1.4301 X5CrNi18 10 304 S 17 AISI 304 08Ch18N10
1.4305 =0.12 =1.00 =2.00 0.06 0.15-0.35 17.0-19.0   8.00-10.0     1.4305 X10CrNiS18 9 303 S 22/31 AISI 303  
1.4306 =0.03 =1.50 =1.50 0.035 0.02 17.0-20.0   8.00-12.0     1.4306 G-X2CrNi18 9 304/305 S 11 ASTM A351 CF-3 03Ch18N11
1.4308 =0.07 =1.50 =1.50 0.04 0.03 18.0-20.0 =0.50 8.00-11.0     1.4308 G-X6CrNi18 9 304 C 15 ASTM A351 CF-8 07Ch18N9L
1.4310 =0.12 =1.50 =2.00 0.045 0.015 16.0-18.0 =0.80 6.00-9.00     1.4310 X12CrNi17 7 301 S 21/22 AISI 301  
1.4312 =0.12 =2.00 =1.50 0.045 0.03 17.0-19.5   8.00-10.0     1.4312 G-X10CrNi18 8 302 C 25   10Ch18N9L
1.4401 =0.07 =1.00 =2.00 0.045 0.03 16.5-18.5 2.00-2.50 10.5-13.5     1.4401 X5CrNiMo17 12 2 316 S 13/17/19 AISI 316  
1.4404 =0.03 =1.50 =1.50 0.035 0.02 17.0-20.0 2.00-3.00 9.00-13.0     1.4404 G-X2CrNiMo18 10 316 S 11/13/14 ASTM A 351 CF-3M  
1.4408 =0.07 =1.50 =1.50 0.04 0.03 18.0-20.0 2.00-2.50 9.00-12.0     1.4408 G-X6CrNiMo18 10 316 C 16 ASTM A 351 CF-8M 07Ch18N10G2SM2L
1.4410 =0.12 =2.00 =1.50 0.045 0.03 17.0-19.5 2.00-2.50 9.00-11.0     1.4410 G-X10CrNiMo18 9      
1.4435 =0.03 =1.00 =2.00 0.045 0.03 16.5-18.5 2.50-3.00 12.5-15.0     1.4435 X2CrNiMo18 14 3 316 S 11/13/14 AISI 316L 03Ch17N14M3

worknorme/
werkstoff
C Si Mn P S Cr Mo Ni Nb Ti worknorme/
werkstoff
DIN BS* ASTM / AISI * GOST *
Germany % % % = % = % % % % % % Germany Germany Great Britain USA Russia
1.4436 =0.07 =1.00 =2.00 0.045 0.025 16.5-18.5 2.50-3.00 11.0-14.0     1.4436 X5CrNiMo17 13 3 316 S 19/31 AISI 316  
1.4502 =0.09 =1.40 =1.40 0.03 0.02 16.7-18.3       0.35-0.65 1.4502 X8CrTi18      
1.4523 =0.030 =1.00 =0.50 0.04 0.15-0.35 17.5-19.0 2.00-2.50 0.30-0.85     1.4523 X8CrMoTi17      
1.4541 =0.80 =1.00 =2.00 0.045 0.03 17.0-19.0 9.00-12.0     >(5xC)
=0.80
1.4541 X6CrNiTi18 10 321 S 31/51 AISI 321 06Ch18N10T
1.4571 =0.80 =1.00 =2.00 0.045 0.03 16.5-18.5 2.00-2.50 10.5-13.5   >5xC
=0.80
1.4571 X6CrNiMoTi17 12 2 320 S 18/31 AISI 316Ti 10Ch17N13M2T
1.4571 =0.80 =1.00 =2.00 0.045 0.03 16.5-18.5 2.00-2.50 10.5-13.5   >5xC
=0.80
1.4571 X10CrNiMoTi18 10 320 S 18/31 AISI 316Ti 10Ch17N13M2T
1.4573 =0.10 =1.00 =2.00 0.045 0.03 16.5-18.5 2.00-2.50 12.0-14.5   >5xC 1.4573 X10CrNiMoTi18 12 320 S 33 AISI 316Ti 10Ch17N13M3T
1.4576 =0.06 =1.40 =1.90 0.025 0.015 18.2-19.8 2.50-3.00 10.2-12.8 >(12xC)=1.15   1.4576 X5CrNiMoNb19 12      
1.4580 =0.08 =1.00 =2.00 0.045 0.03 16.5-18.5 2.00-2.50 11.0-14.0 >8xC   1.4580 G-X10CrNiMoNb18 10 318 S 17 AISI 316Cb 08Ch16N13M2B
1.4581 =0.07 =1.50 =1.50 0.04 0.03 18.0-20.0 2.00-2.50 9.00-12.0 >8x
C=1.00
  1.4581 G-X5CrNiMoNb18 10 318 C 17    
1.6902 =0.07 =2.00 =1.50 0.035 0.015 18.0-20.0 =0.50 9.00-11.0     1.6902 G-X6CrNi18 10      
1.7102 0.51-0.59 1.20-1.60 0.50-0.80 0.03 0.03 0.50-0.80         1.7102 54SiCr6      
1.7335 0.08-0.18 =0.35 0.40-1.00 0.03 0.025 0.70-1.15 0.40-0.60       1.7335 13CrMo4-4 1501-620/621 A182 Grade F11/12 12ChM; 15ChM
1.7357 0.15-0.20 =0.60 0.50-1.00 0.02 0.02 1.00-1.50 0.45-0.65       1.7357 GS-17CrMo5-5   A217 Grade WC6  
1.7380 0.08-0.15 0.30-0.50 0.40-0.70 0.04 0.04 2.00-2.50 0.90-1.10       1.7380 10CrMo9 10 1501-622/515 A182 Grade F22 12Ch8
1.8159 0.47-0.55 =0.40 0.70-1.10 0.035 0.035 0.90-1.20         1.8159 50CrV4 735, H 51 6150 50ChFA

Worknorme Mn P Si Ni Cu Sn Zn Pb Al Fe Worknorme DIN BS* ASTM / AISI* GOST*
Germany % % % % % % % % % % Germany Germany Great Britain USA Russia
not available         65 0.8 30.7 2 1.5   not available SoMs 2065      
2.0265 =0.05       69.0-71.0 =0.05 rem =0.05 =0.02 =0.05 2.0265 CuZn30      
2.0332 =0.10     =0.30 62.0-64.0 =0.10 rem 0.10-0.70 =0.05 =0.20 2.0332 CuZn37Pb0.5      
2.0340.05 =0.10 =0.05     59.0-63.0 =0.70 rem 0.50-2.50 0.20-0.80 =0.50 2.0340.05 G-CuZn37Pb      
2.0380 =0.10     =0.30 58.5-59.8 =0.20 rem 1.50-2.50 =0.10 =0.40 2.0380 CuZn39Pb2 2874 CZ121 B124 C37700  
2.0401 =0.20     =0.40 57.5-59.0 =0.30 rem 2.50-3.30 =0.10 =0.40 2.0401 CuZn39Pb3 2874 CZ121 B124 C37700  
2.0402 =0.20     =0.40 57.5-59.0 =0.30 rem 1.50-2.50 =0.10 =0.40 2.0402 CuZn40Pb2 2872 CZ122 B124 C37700  
2.0406 =0.20     =0.40 56.0-58.0 =0.30 rem 1.50-2.50 =0.10 =0.40 2.0406 CuZn41Pb2 2872 CZ123 B124 C37700  
2.0540 1.50-2.50   =0.10 2.00-3.00 58.0-61.0 =0.50 rem =0.80 0.30-1.5 =0.50 2.0540 CuZn35Ni      
2.0966 =1.50     3.00-6.00 79.5-85.0       8.50-10.5 2.50-5.30 2.0966 CuAl10Ni 2872 Ca104 B150 C63000  
2.0975.01 =2.50     4.00-6.50 >76.0       8.50-11.0 3.50-5.50 2.0975.01 G-CuAl10Ni 1400 AB2 B148 C95500  
2.1030   0.01-0.40   =0.30 rem 7.50-9.00 =0.30 =0.05   =0.10 2.1030 CuSn8 2872 Pb104 B103 C52100  
2.1050.01   =0.20     88.0-90.0 9.00-11.0 =0.50 =1.00   =0.20 2.1050.01 G-CuSn10 1400 Pb4    
2.1086.01   =0.05     86.0-89.0 9.00-11.0 1.00-3.00 =1.50   =0.25 2.1086.01 G-CuSn10Zn(Rg 10) 1400 G1 B584 C90500  
2.1090.01   =0.05     81.0-85.0 6.00-8.00 3.00-5.00 5.00-7.00   =0.25 2.1090.01 G-CuSn7ZnPb(Rg 7) 1400 LPB1 B584 C93200  
2.1096.01   =0.05     84.0-86.0 4.00-6.00 4.00-6.00 4.00-6.00   =0.30 2.1096.01 G-CuSn5ZnPb(Rg 5) 1400 LG2 B62 C83600  
3.2523 0.10-0.50   10.5-13.5 =0.20 =1.00 =0.10 =0.50 =0.20 rem =0.80 3.2523 GB-AlSi12(Cu)      
3.2581 =0.40   10.5-13.5   =0.05   =0.10   rem =0.50 3.2581 G-AlSi12      

* equivalent materials to DIN to be used for guidance only

THINK!- MARYLAND METRICS - The One-Stop Source For Metric And British Sized Fasteners, Wrenches, Cutting, & Measuring Tools, Metal Shapes, Oil Seals, O-Rings, Mechanical Power Transmission Equipment, Bearings, Hydraulic And Pneumatic Fittings & Tubing, Workholding Components, Plumbing Fittings, & Some Electrical & Electronic Components. Click to go to Maryland Metrics home page

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 2003, 2005, 2011, 2015 maryland metrics -- all rights reserved -- ver ll30cCD matnr2.htm